U.S. Army Parachute Rigger Long-Sleeve T-Shirt
Long-sleeve T-shirt — Next Level 3601
Athletic Fit – Runs a little small. Please see sizing guide.
Measurements are in inches. Compare with a well-fitting long-sleeve shirt you already own.
| Size | Chest width (laid flat) | Body length |
|---|---|---|
| S | 18.5" | 28" |
| M | 20" | 29" |
| L | 21.5" | 30" |
| XL | 23.5" | 31" |
| 2XL | 25.5" | 32" |
Lay the shirt flat on a level surface without stretching. Smooth out folds, then measure straight across from side seam to side seam, one inch below the armhole seams.
Measure body length from the high point of the shoulder beside the neck to the bottom hem.
Chest width is half the garment circumference. Doubling it gives the measurement around the garment, not a recommended body chest size.
Chest-width manufacturing tolerance: ±0.5 inch.
You can Always Be Sure that there is no Airborne without Riggers!
- 4.3-ounce, 100% combed ring-spun cotton jersey, 32 singles (solid colors)
- 4.3-ounce, 90% cotton / 10% polyester, 32 singles (Heather Gray)
- Self 3/8-inch shoulder-to-shoulder binding
- Crew neck
Athletic Fit – Runs a little small. Please see sizing guide.
This design is also available as
Unit History & Information
After World War II, the Army assigned aerial delivery, including parachute rigging, to the Quartermaster Corps. A parachute rigger course opened at the Quartermaster School at Fort Lee, Virginia, in 1951. Riggers pack, maintain, and repair parachutes for personnel and cargo, supporting everything from individual jumps to the delivery of vehicles and supplies. Their distinctive red hats help airborne personnel identify them quickly when equipment needs attention. Army quality-control practices include requiring riggers to jump with a randomly selected parachute they packed themselves. The rigger wings on this design recognize that technical skill and personal responsibility within the airborne community.